A carrying bag will provide protection for your unit during storage or during transportation in normal conditions.

The compact case houses a complete KLOVER MiK 09. There are compartments for the KM-09, but not any accessories. (Approximate dimensions: 13.2" x 11.1" x 5.2")

The flight case also houses a complete KLOVER MiK 09. There are compartments for the KM-09, as well as a preamp, and collapsible headphones. (Approximate dimensions: 18.3" x 13.8" x 6.8")

Any omnidirectional microphone may be used with your KLOVER MiK 09, but we offer the following microphones pre-installed as a convenience for our customers.

Microphone Madness 3.5mm TRS Lapel Mic - The MM-ML has a 3.5mm TRS connector commonly used by digital recorders and digital cameras.  It requires plug-in power.

Klover Equalized XLR Lapel Mic - The Klover Equalized mic has been created specifically to provide a more natural sound when used with our 9-inch and 16-inch parabolic microphones.  It is based on the Countryman B3 so it is very weather resistant. It comes with an XLR connector and requires phantom power.

Countryman B3P4FF05B XLR Lapel Mic - The Countryman B3 is reasonably priced and very weather resistant. It comes with an XLR connector and requires phantom power.

Sennheiser MKE2-P XLR Lapel Mic - The Sennheiser MKE2 is popular with broadcast audio engineers. It comes with an XLR connector and requires phantom power.

DPA 4060 XLR Lapel Mic - The DPA 4060 is the most sensitive microphone we offer. It comes with an XLR connector and requires phantom power.

Sennheiser EW 112P G4 Wireless Lavaliere Microphone - The EW 112 is the only wireless microphone we offer. It comes with two output cables, one with a 3.5mm TRS connector and one with an XLR connector.  It does not require any external power.

If not connected directly to a camera, some type of audio recorder or amplifier is required to capture audio.

The BeachTek unit is the lowest cost but has an unbalanced output so the output can only be shared with devices that are within approximately 10 feet of the amplifier.

The Whirlwind unit is less expensive than the Sound Devices, unit but slightly heavier.

The Sound Devices unit is the most rugged.

The Zoom F1 recorder is ideal when the audio is to be monitored and/or recorded but not output to another device. It comes complete with a lapel microphone.

The Zoom H4 recorder can be used to monitor and/or record audio as well as supply that audio to a PC via USB.

The Rolls amplifier is ideal for connecting your microphone to a PC, or connecting a 3.5mm mic to a device a long distance away.

If not connected directly to a camera, some type of audio recorder or amplifier is required to capture audio.

The BeachTek unit is the lowest cost but has an unbalanced output so the output can only be shared with devices that are within approximately 10 feet of the amplifier.

The Whirlwind unit is less expensive than the Sound Devices, unit but slightly heavier.

The Sound Devices unit is the most rugged.

The Zoom F1 recorder is ideal when the audio is to be monitored and/or recorded but not output to another device. It comes complete with a lapel microphone.

The Zoom H4 recorder can be used to monitor and/or record audio as well as supply that audio to a PC via USB.

The Rolls amplifier is ideal for connecting your microphone to a PC, or connecting a 3.5mm mic to a device a long distance away.

Operators typically use their ears more than their eyes to aim the parabolic microphone. A good headset provides the audio the operators require.

The Pro4AA is low cost and very rugged.

The HD 280 is foldable to be more compact (replaced the SRH440 previously offered).

The HN-7506 provides the ultimate in isolation for very loud environments.

These accessories provide additional flexibility in mounting your Sound Shark.

The Mini Ball Head is ideal when mounting the Sound Shark on a camera.  The Light Stand Mount is obviously used with a light stand.   (A pistol grip handle is also available.)